Last updated
Was this helpful?
Last updated
Was this helpful?
♦♦NEC Fiber-Optic Cable Types♦♦
The NEC recognizes three types of fiber-optic cables :
♦Nonconductive Cables containing no electrically conductive materials.
♦Conductive Cables containing non-current-carrying conductive members, including strength members, armor, or sheath.
♦Composite Cables containing optical fiber and current-carrying electrical conductors. These cables may also contain non-current-carrying conductive members such as metallic strength members, metallic vapor barriers, metallic armor, or a metallic sheath.
The NEC classifies fiber-optic cables according to their electrical and fire safety characteristics and contains rules for the use of each cable type to minimize hazards. Any fiber-optic cabling run indoors must be listed as suitable for the purpose. Any outside plant non listed fiber-optic cabling that is brought into a structure must be terminated after no more than 15m or and connectorized or spliced to a listed cable.
A listed fiber-optic cable has had its performance verified by Underwriters Laboratory (UL).
Optical fiber cables installed within buildings shall be listed as being resistant to the spread of fire. Three listed types of cables are recognized for indoor installations :
plenum cable, riser cable, and general-purpose cable.
♦Plenum Cable♦
Plenum cables, whether conductive or nonconductive, are suitable for use in ducts, plenums, and other space used for environmental air. These cables will have fire resistance and low smokeproducing characteristics.
♦Riser Cable♦
Riser cables, whether conductive or nonconductive, are suitable for a vertical run in a shaft or from floor to floor. These cables will have fire-resistance characteristics capable of preventing the carrying of a fire from floor to floor.
♦General-Purpose Cable♦
General-purpose cables, whether conductive or nonconductive, are resistant to the spread of fire.
Các loại cáp quang theo NEC
Mã điện quốc gia Mỹ (NEC) công nhận ba loại cáp quang:
Phân loại
Cáp không dẫn điện: Không chứa vật liệu dẫn điện.
Cáp dẫn điện: Chứa thành phần dẫn điện không mang dòng, bao gồm thành phần tăng cường, áo giáp hoặc vỏ bọc.
Cáp tổng hợp: Chứa sợi quang và dây dẫn điện mang dòng. Cáp này cũng có thể chứa thành phần dẫn điện không mang dòng.
Tiêu chuẩn an toàn
NEC phân loại cáp quang dựa trên đặc tính an toàn điện và phòng cháy, bao gồm quy định sử dụng cho từng loại cáp.
Yêu cầu
Cáp quang trong nhà phải được chứng nhận phù hợp mục đích.
Cáp quang ngoài trời không được chứng nhận phải được kết thúc sau 15m hoặc kết nối với cáp được chứng nhận.
Cáp quang được chứng nhận bởi Underwriters Laboratory (UL).
Loại cáp quang cho lắp đặt trong nhà
Cáp plenum: Dùng cho đường ống, không gian thông gió. Cáp này có khả năng chống cháy và sản sinh ít khói.
Cáp riser: Dùng cho lắp đặt thẳng đứng trong shaft hoặc giữa các tầng. Cáp này có khả năng chống cháy giữa các tầng.
Cáp mục đích chung: Chống lại sự lan truyền của lửa.
Lưu ý: NEC yêu cầu cáp quang phải được thiết kế và lắp đặt để đảm bảo an toàn và ngăn chặn rủi ro.