Cabling Pathways
Last updated
Was this helpful?
Last updated
Was this helpful?
♦♦Cabling Pathways♦♦
TIA-569-C, Commercial Building Telecommunications Pathways and Spaces Standard for concealing, protecting, and routing your cable plant.
♦♦Conduit♦♦
Conduit is pipe, It can be metallic or nonmetallic, rigid or flexible (as permitted by the applicable electrical code), and it runs from a work area to a telecommunications room and a telecommunications room to an equipment room. One advantage of using conduit to hold your cables
is that conduit may already exist in your building. Assuming the pipe has enough space, it shouldn’t take long to pull your cables through it. A drawback to conduit is that it provides a finite amount of space to house cables. When drafting specifications for conduit, we recommend
that you require that enough conduit be installed so that it would be only 40 percent full by your current cable needs. Conduit should be a maximum of 60 percent full. This margin leaves you with room for future growth.
According to the TIA-569-C standard, conduit can be used to route horizontal and backbone cables.
♦Firestopped conduit can also be used to connect telecommunications rooms in multistoried buildings to an equipment room.
♦♦Cable Trays♦♦
As an alternative to conduit, cable trays can be installed to route your cable. Cable trays are typically wire racks specially designed to support the weight of a cable infrastructure.
They provide an ideal way to manage a large number of horizontal runs. Cables simply lie within the tray, so they are very accessible when it comes to maintenance and troubleshooting. The TIA-569-C standard provides for cable trays to be used for both horizontal and backbone cables.
This type of runway looks like a ladder that is mounted horizontally inside the ceiling space or over the top of equipment racks in a telecommunications or equipment room. In the ceiling space, this type of runway keeps cables from being draped over the top of fluorescent lights, HVAC equipment, or ceiling tiles; the runway is also helpful in keeping cable from crossing electrical conduit. Separating the cable is especially useful near telecommunications and equipment rooms where there may be much horizontal cable coming together. When used in a telecommunications or equipment room, this runway can keep cables off the floor or can run from a rack of patch panels to an equipment rack.
Đường cáp (Cabling Pathways)
Tiêu chuẩn TIA-569-C quy định về đường cáp trong tòa nhà thương mại, bao gồm việc che giấu, bảo vệ và định tuyến cây cáp.
Các loại đường cáp
Ống dẫn (Conduit): Là ống kim loại hoặc phi kim loại, cứng hoặc mềm (theo mã điện), chạy từ khu vực làm việc đến phòng viễn thông và từ phòng viễn thông đến phòng thiết bị.
Ưu điểm: Có thể tận dụng ống dẫn hiện có trong tòa nhà.
Nhược điểm: Không gian hạn chế cho cáp.
Tiêu chuẩn: Đầy tối đa 60% ống dẫn, để lại không gian cho tương lai.
Khay cáp (Cable Trays): Là giá đỡ cáp, thường được thiết kế đặc biệt để hỗ trợ trọng lượng của cơ sở hạ tầng cáp.
Ưu điểm: Dễ dàng quản lý và bảo trì.
Tiêu chuẩn: Có thể sử dụng cho cáp ngang và cáp xương sống.
Tiêu chuẩn TIA-569-C
Ống dẫn và khay cáp có thể được sử dụng để định tuyến cáp ngang và cáp xương sống.
Ống dẫn có thể được sử dụng để kết nối các phòng viễn thông trong tòa nhà nhiều tầng với phòng thiết bị.
Khay cáp giúp quản lý cáp và ngăn chặn cáp bị rối hoặc chéo.
hashtag#RCDD Knowledge